FORTINET NSE7_SDW-7.2 EXAM | NEW NSE7_SDW-7.2 EXAM PDF - BRING YOU THE BEST NSE7_SDW-7.2 VALID TEST PRACTICE

Fortinet NSE7_SDW-7.2 Exam | New NSE7_SDW-7.2 Exam Pdf - Bring you The Best NSE7_SDW-7.2 Valid Test Practice

Fortinet NSE7_SDW-7.2 Exam | New NSE7_SDW-7.2 Exam Pdf - Bring you The Best NSE7_SDW-7.2 Valid Test Practice

Blog Article

Tags: New NSE7_SDW-7.2 Exam Pdf, NSE7_SDW-7.2 Valid Test Practice, Positive NSE7_SDW-7.2 Feedback, NSE7_SDW-7.2 Most Reliable Questions, Certification NSE7_SDW-7.2 Test Answers

Our TestKingFree will provide you with the most satisfying after sales service. We provide one-year free update service to you one year after you have purchased NSE7_SDW-7.2 exam software., which can make you have a full understanding of the latest and complete NSE7_SDW-7.2 Questions so that you can be confident to pass the exam. If you are unlucky to fail NSE7_SDW-7.2 exam for the first time, we will give you a full refund of the cost you purchased our dump to make up your loss.

Fortinet NSE7_SDW-7.2 Exam Syllabus Topics:

TopicDetails
Topic 1
  • SD-WAN Troubleshooting: Troubleshooting SD-WAN issues, including rules, routing, and ADVPN, is vital for maintaining network reliability. This section of the Fortinet NSE 7 - SD-WAN 7.2 exam tests the ability to diagnose and resolve SD-WAN problems using diagnostic commands and monitoring tools, ensuring robust and uninterrupted network operations.
Topic 2
  • SD-WAN Overlay Design and Best Practices: It focuses on the deployment of hub-and-spoke IPsec topologies and configuring ADVPN. Proficiency in this topic ensures that Fortinet network and security professionals can implement effective and reliable SD-WAN overlays tailored to organizational needs.
Topic 3
  • SD-WAN Configuration: This topic assesses skills of Fortinet network and security professionals in setting up basic SD-WAN environments, including configuring Direct Internet Access (DIA), SD-WAN Members, and Performance Service Level Agreements (SLAs). Proficiency here ensures the ability to design efficient and resilient SD-WAN configurations.
Topic 4
  • Rules and Routing: Understanding SD-WAN Rules and Routing is crucial for directing traffic effectively. This topic of the NSE7_SDW-7.2 Exam evaluates the capabilities of Fortinet network and security professionals to configure SD-WAN rules and routing.
Topic 5
  • Centralized Management: This area focuses on deploying and managing SD-WAN through FortiManager, including using IPsec templates and SD-WAN Overlay Templates. Mastery here demonstrates the abilities of Fortinet network and security professionals to streamline SD-WAN configuration, enhance security, and maintain consistent policies across multiple sites.

>> New NSE7_SDW-7.2 Exam Pdf <<

Verified Fortinet NSE7_SDW-7.2: New Fortinet NSE 7 - SD-WAN 7.2 Exam Pdf - Professional TestKingFree NSE7_SDW-7.2 Valid Test Practice

There are some education platforms in the market which limits the user groups of products to a certain extent. And we have the difference compared with the other NSE7_SDW-7.2 quiz materials for our NSE7_SDW-7.2 study dumps have different learning segments for different audiences. We have three different versions of our NSE7_SDW-7.2 Exam Questions on the formats: the PDF, the Software and the APP online. Though the content is the same, the varied formats indeed bring lots of conveniences to our customers.

Fortinet NSE 7 - SD-WAN 7.2 Sample Questions (Q99-Q104):

NEW QUESTION # 99
Refer to the exhibits.
Exhibit A -

Exhibit B -

Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member status, the routing table, and the performance SLA status.
If port2 is detected dead by FortiGate, what is the expected behavior?

  • A. Port2 becomes alive after three successful probes are detected.
  • B. FortiGate removes all static routes for port2.
  • C. The administrator manually restores the static routes for port2, if port2 becomes alive.
  • D. Host 8.8.8.8 is reachable through port1 and port2.

Answer: B

Explanation:
This is due to Update static route is enable which removes the static route entry referencing the interface if the interface is dead


NEW QUESTION # 100
Which statement about using BGP for ADVPN is true?

  • A. IBGP is preferred over EBGP, because IBGP preserves next hop information.
  • B. You must configure BGP communities.
  • C. You must configure AS path prepending.
  • D. You must use BGP to route traffic for both overlay and underlay links.

Answer: A

Explanation:
ADVPN is a technology that allows dynamic creation of IPsec tunnels between branch sites without requiring pre-configured policies or keys. BGP is a routing protocol that can be used to exchange routes between ADVPN peers. IBGP is a type of BGP that runs between routers in the same autonomous system (AS), while EBGP is a type of BGP that runs between routers in different ASes. IBGP is preferred over EBGP for ADVPN, because IBGP preserves the next hop information of the routes, which is needed to establish the IPsec tunnels. EBGP changes the next hop information to the EBGP peer address, which may not be reachable by the ADVPN peers. Therefore, using IBGP for ADVPN avoids the need to configure additional static routes or redistribute routes between BGP and another routing protocol. References = ADVPN with BGP as the routing protocol, ADVPN, SD-WAN self-healing with BGP, Technical Tip: ADVPN with BGP as the routing protocol


NEW QUESTION # 101
Exhibit.

The exhibit shows VPN event logs on FortiGate. In the output shown in the exhibit, which statement is true?

  • A. The VPN tunnel T_MPLS_0 is a shortcut tunnel.
  • B. There is one shortcut tunnel built from master tunnel T_MPLS_0.
  • C. The master tunnel T_INET_0 cannot accept the ADVPN shortcut.
  • D. There are no IPsec tunnel statistics log messages for ADVPN cuts.

Answer: B

Explanation:
VPN event logs record the status of VPN tunnels, such as the establishment, termination, or failure of a tunnel.
The output includes the following information:
logid: the log ID number
type: the log type, either traffic or event
subtype: the log subtype, either vpn or ipsec
level: the log level, either error, warning, or notice
vd: the virtual domain name
logdesc: the log description
msg: the log message
action: the log action, such as tunnel-up, tunnel-down, or tunnel-stats remip: the remote IP address locip: the local IP address remport: the remote port number locport: the local port number outintf: the outgoing interface name cookies: the IKE SA cookies user: the user name group: the user group name useralt: the alternative user name xauthuser: the XAuth user name authgroup: the XAuth user group name assignip: the assigned IP address vpntunnel: the VPN tunnel name tunnellip: the tunnel loopback IP address tunnelid: the tunnel ID number tunneltype: the tunnel type, either ipsec or ssl duration: the tunnel duration in seconds sentbyte: the number of bytes sent rcvdbyte: the number of bytes received nextstat: the next statistics interval in seconds advpnsc: the ADVPN shortcut flag, either 0 or 1 Based on the exhibit, the following statement is true:
There is one shortcut tunnel built from master tunnel T_MPLS_0. This means that the VPN tunnel T_MPLS_0 is a master tunnel that can send ADVPN shortcut offers to other spokes, and the VPN tunnel T_MPLS_0_0 is a shortcut tunnel that is built from the master tunnel T_MPLS_01. In the exhibit, the log action for T_MPLS_0 is tunnel-up, and the log action for T_MPLS_0_0 is shortcut-up. The advpnsc flag for T_MPLS_0 is 0, indicating that it is not a shortcut tunnel, while the advpnsc flag for T_MPLS_0_0 is 1, indicating that it is a shortcut tunnel.


NEW QUESTION # 102
Which two statements are true about using SD-WAN to steer local-out traffic? (Choose two.)

  • A. By default, local-out traffic does not use SD-WAN.
  • B. FortiGate does not consider the source address of the packet when matching an SD-WAN rule for local-out traffic.
  • C. You must configure each local-out feature individually, to use SD-WAN.
  • D. By default, FortiGate does not check if the selected member has a valid route to the destination.

Answer: A,C


NEW QUESTION # 103
Refer to the exhibit.

The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured latency will make T_MPLS_0 the new preferred member?

  • A. When T_MPLS_0 has a latency of 100 ms.
  • B. When T_INET_0_0 and T_MPLS_0 have the same latency.
  • C. When T_N1PLS_0 has a latency of 80 ms.
  • D. When T_INET_0_0 has a latency of 250 ms.

Answer: C


NEW QUESTION # 104
......

This format of Fortinet NSE7_SDW-7.2 exam preparation material is compatible with smartphones and tablets, providing you with the convenience and flexibility to study on the go, wherever you are. Our NSE7_SDW-7.2 PDF questions format is portable, allowing you to study anywhere, anytime, without worrying about internet connectivity issues or needing access to a desktop computer. Actual Fortinet NSE7_SDW-7.2 Questions in the Fortinet NSE7_SDW-7.2 PDF are printable, enabling you to study via hard copy.

NSE7_SDW-7.2 Valid Test Practice: https://www.testkingfree.com/Fortinet/NSE7_SDW-7.2-practice-exam-dumps.html

Report this page